In October last year, the first model of a 3D printer from the company Alfawise called U20 was presented. This model, unanimously recognized as excellent. It had the advantage that it was supplied assembled at 90%. Also offering a large print surface measuring 30 x 30 x 40 cm. In addition, there was a color touch screen to control.
Hence my interest after the appearance in the Alfawise catalog of a new generation of the 3D printer called U30. In this review, we will analyze all printing issues and find out whether it is worth buying an Alfawise U30? The prices for a new generation start at $180.
For this price, the Alfawise U30 has all the technological advantages of the U20 but has a much smaller footprint: 42.5 x 40.2 x 50.5 cm.
The Alfawise U30 3D printer is a compact printer model. The electronic unit is located under the surface of the seal, and the coil is on the frame itself. The total print area is 220 x 220 x 250 mm.
Let’s begin our full review of the Alfawise U30 3D printer and we will begin with technical specs.
Alfawise U30: Specifications
|Size of the printer:||42.50 x 40.20 x 50.50 cm|
|Construction volume:||22 x 22 x 25cm|
|Frame material:||Aluminum Alloy|
|Filament diameter:||1.75 mm|
|Supporting material:||ABS,PLA,Wood Filled|
|Print speed:||30 - 120mm/s|
|Connector Type:||SD card,USB|
|Product weight:||7.8 kg|
Alfawise U30: Unboxing and Packaging
We got a regular cardboard box, which is well filled in two layers. Also between the parts was protected foam, which avoids any traffic accidents.
The Alfawise U30 printer is not supplied assembled, like the previous model U20. But you do not have to spend a lot of time assembling.
Therefore, at this stage, I would like to say a few words about the configuration and go to the assembly of the U30. As for its budget price, this is a well-built printer and has all the components to do the job 100%.
Alfawise U30: Build
The U30 printer comes in semi-disassembled form, and it takes from one hour to an hour and a half to assemble it. The assembly was no more complicated than furniture from IKEA.
I find it more informative to better understand the settings and general operation of the printer.
The entire base with the tray support (Y-axis), the electronic board and the wiring harness are already assembled. Therefore, most of the work has already been done.
Through this process, Alfawise optimizes the cost of production, storage, and transportation.
To help you with the assembly, a color instruction manual is included with the printer. But real help comes with the installation guide file in PDF format, which comes bundled on a MicroSD memory card and comes with a USB drive.
Alfawise U30: First Printing and Usage
Alfawise is aimed at both beginners and advanced users. Alfawise U30 in the test is equipped with many features. In competition, the new U30 printer model can easily compete with Creality ENDER 3 and even with some advantages.
As for use, I was not disoriented by the Alfawise U20, because the U30 compact printer has the same firmware and, therefore, work.
The coil is located above the printer. The cable is clamped in the upper extruder, and through the printer menu, you can automatically load it before exiting the nozzle.
Alfawise supplies just a few meters of wire. The Alfawise U30 printer works with a standard PLA thread (recommended for beginners), or PETG. The keyboard shortcuts on the touch panel will allow the tray and the nozzle to be heated to the optimum temperature for these materials.
One of the first operations before printing is to calibrate the working surface through the corresponding menu by rotating the guides above the working surface.
The included microSD memory card is inserted into the memory slot on the back of the printer. The media offers several printing templates for testing your printer.
Once the file has been selected, the nozzle will raise the temperature very quickly. Then the seal itself begins.
In real-time, the main screen shows the print progress, temperature, ventilation, etc. The dynamic change of parameters is also possible.
The touch screen and other interfaces are intuitive.
The print noise is tolerable and mainly due to fans. Printer design vibrates very little. The tray, even if it is not perfectly smooth, does not create problems when printing on small models.
In addition, I tested the print recovery function in the event of a network failure after a general outage. When turning on the power, the printer asked me if I wanted to continue the process. The print recovery created a mini defect, but it was minor.
Below you can see the print results of some models on the Alfawise U30 printer in our analisis.
As for its budget price, the Alfawise U30 3D printer does its job perfectly.
Alfawise U30: Conclusions and Reviews
The new generation of Alfawise U30 3D printer surprised me. As for its price, this is the perfect device for printing small models.
I even found some advantages over the previous Alfawise U20 or CR10S model. Printing to a printer was a pleasant moment, which reinforced the desire to print more and more models.
The community around Alfawise 3D printers is expanding regularly, so it is reassuring in case of questions or minor problems with the printer itself.
During our testing of a compact model of a 3D printer, we did not find any problems. So if you wanted a small printer for a fascinating new hobby, then the new Alfawise U30 would be a good start.
Alfawise U30: Price and Where to buy cheaper?
The cost of the printer Alfawise U30 is about $179.99 with a 15% discount. At this attractive price, a new 3D printer is one of the best models in its segment. It deserves a good 4/5 rating.
Therefore, I recommend the purchase of a new model Alfawise U30. It is an ideal compact printer with a 220 x 220 x 250 mm working surface and a color touch screen.